MPPT | battery chargers | DC regulators Victron BlueSolar MPPT 150/100-Tr VE.Can Charger

Victron BlueSolar MPPT 150/100-Tr VE.Can Charger
SCC115110420

Victron BlueSolar MPPT 150/100-Tr VE.Can Charger

€ 512.74

 In shopping basket

Delivered by 07/07

Details

Victron Energy BlueSolar MPPT 150/100-Tr VE.Can Solar Charge Controller EAN 8719076049852

The Victron Energy BlueSolar MPPT 150/100-Tr VE.Can is an advanced mppt charge controller that optimizes the power harvest from your solar panels. This intelligent solar regulator is designed for 12V, 24V, 36V, and 48V battery systems, delivering a maximum charge current of 100 Amps. It is the perfect power solution for an off-grid solar system, marine applications in a boat or yacht, and mobile use in a camper van or caravan.

Features and smart monitoring This high-quality photovoltaic controller utilizes ultra-fast Maximum Power Point Tracking. This ensures up to thirty percent higher energy yield compared to standard controllers, especially during overcast skies. The fanless design delivers an outstanding efficiency of 99 percent and whisper-quiet operation. An intelligent charging algorithm manages battery state of charge to prevent deep discharge and extend battery bank lifespan. Real-time data can be accessed via an optional Bluetooth dongle or a GX device using the free VictronConnect app.

Key benefits and specifications

  • Equipped with a VE.Can communication port to synchronize up to 25 chargers in parallel using RJ45.

  • Supports a high maximum solar input voltage of 150V and a powerful 100A charging current.

  • Seamless integration with the VRM portal through a Cerbo GX for centralized remote energy management.

  • Unique feature allowing the controller to revive and recharge deeply discharged batteries.

Installation and user manual Mount the BlueSolar MPPT vertically on a non-flammable surface with the terminals facing downwards. First, connect the battery bank to the Tr screw terminals to allow automatic system voltage detection. Next, connect the PV cables from your solar array. Optionally, link the VE.Can bus for multi-charger synchronization. Open the app on your smartphone or use a GX interface to configure the correct battery profile, such as lithium or AGM. The battery charger then operates fully automatically.